Configuring Pulse Converter Settings

To ensure accurate monitoring of pulse-based measurements, it is essential to configure the Pulse Converter settings correctly. The configuration process includes defining ratio and unit for the pulse readings. These settings are specifically applicable for the Milesight EM300DI device.

Navigate to the Settings Menu

Navigate to Pulse Convertor and toggle the Pulse Convertor setting to ON

Enter the Configuration Details:

• Label: Define the label for the pulse data (Consumption)

• Ratio: Set the ratio of pulses to the desired unit (For example 1000 pulses = 1000 kWh)

• Unit: Specify the unit of measurement for the pulse reading (kWh)

• After entering required values, click Save to apply the changes